Advantages and disadvantages of single glass and double glass of Jinan glass partition door: double glass can be added with shutters, and the glass is slightly thin, which has both permeability and privacy. If the glass is single-layer, it is generally thick, and the pursuit is perfect transparency. If you buy it in the office, double-layer glass is a traditional product, and single-layer glass is more elegant. It mainly depends on what purpose and where to use it. Both have their own characteristics.

傳統意義上的辦公區一般都是雙層玻璃和百葉隔開，但很多公司追求現代設計氛圍，選擇單層玻璃，優雅而與眾不同。雙層玻璃隔斷由兩層玻璃組成，中間百葉玻璃通常為5mm鋼化玻璃。單層玻璃是一層鋼化玻璃，一般8mm鋼化玻璃。

In the traditional sense, the office area is generally separated by double-layer glass and shutters, but many companies pursue the modern design atmosphere and choose single-layer glass, which is elegant and different. The double glass partition is composed of two layers of glass, and the middle shutter glass is usually 5mm tempered glass. Single layer glass is a layer of tempered glass, generally 8mm tempered glass.

自動感應門應用廣泛，安裝后每天都會用到一套自動門。自動感應門***定期或日常使用時檢查自動門。俗話說，一個小問題拖久了，就會變成大問題，那么自動門每天要檢查什么呢？下面，自動門將與大家分享一下自動門在日常使用中需要檢查的地方。如果自動門感應門裝有紅外防夾裝置，當自動門打開時，紅外感應眼會被手擋住，自動門不會關閉。通過自動門觀察員工的正常行走路線，根據員工的行走角度感知自動感應門的感應區域。自動門全開時，自動感應門的感應寬度大于門洞寬度。當你走到前門一定距離時，自動門就會打開，操作應該平穩無聲。

Automatic induction doors are widely used. After installation, a set of automatic doors will be used every day. It is better to check the automatic door regularly or during daily use. As the saying goes, if a small problem drags on for a long time, it will become a big problem. What should the automatic door check every day? Next, the automatic door will share with you the places that need to be checked in the daily use of the automatic door. If the automatic door sensing door is equipped with infrared anti pinch device, when the automatic door is opened, the infrared sensing eye will be blocked by hand and the automatic door will not be closed. Observe the normal walking route of employees through the automatic door, and perceive the sensing area of the automatic sensing door according to the walking angle of employees. When the automatic door is fully opened, the sensing width of the automatic sensing door is greater than the width of the door opening. When you walk a certain distance to the front door, the automatic door will open and the operation should be smooth and silent.

一般來說，自動門的安裝只需要六個步驟，但自動門的安裝相當復雜。畢竟很多人對涉及的知識和原理了解不夠，建議人士安裝測試。

Generally speaking, the installation of automatic door only needs six steps, but the installation of automatic door is quite complex. After all, many people do not know enough about the knowledge and principles involved. It is recommended that professionals install and test.

***步:當建筑物入口處需要安裝自動門時，責任方會在網上或通過其他渠道查詢自動門及待安裝自動門公司的信息。通過打電話了解需要安裝的自動門、門洞大小以及現場實際情況。

Step 1: when the automatic door needs to be installed at the entrance of the building, the responsible party will query the information of the automatic door and the company to install the automatic door online or through other channels. Call to know the brand of automatic door to be installed, the size of door opening and the actual situation on site.

第二步:自動門公司將派業務人員和工程人員到現場測量尺寸，檢查現場實際情況，并與責任方討論具體方案。

Step 2: the automatic door company will send business personnel and engineering personnel to the site to measure the size, check the actual situation of the site, and discuss the specific scheme with the responsible party.

第三步:自動門公司的業務人員會編制出自動門的CAD設計圖紙，制定詳細的報價方案并發送給責任方，等待責任方覺得一切正常。

Step 3: the business personnel of the automatic door company will prepare the CAD design drawings of the automatic door, formulate a detailed quotation scheme and send it to the responsible party, waiting for the responsible party to feel that everything is normal.